Hi, it seem that on, some device porteus 5.01 32 bit doesn't take first cheatcode in append.
boot with syslinux poteus.cfg bios legacy
on witch key does it occure: on a scan disc with first ntfs data partition, second EFI FAT, third ext4 boot
what happen?
Code: Select all
MENU LABEL Copy To RAM 5.01 32
KERNEL /boot/syslinux/vmlinuz32
INITRD /boot/syslinux/initrd50132.xz
APPEND copy2ram from=/porteus50132/ ramsize=20% zram=20% noauto
find porteus in sdx3 but doesn't copy to ram
cmdline
Code: Select all
copy2ram from=/porteus50132/ ramsize=20% zram=20% noauto initrd=/boot/syslinux/initrd50132.xz BOOT_IMAGE=/boot/syslinux/vmlinuz32
uname
Code: Select all
Linux porteus.example.net 6.18.16-porteus #1 SMP PREEMPT_DYNAMIC Mon Mar 9 10:04:39 Local time zone must i686 Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz GenuineIntel GNU/Linux
lspci
Code: Select all
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5)
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM86 Express LPC Controller [8086:8c49] (rev 05)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 05)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 73)
Subsystem: Intel Corporation Wireless-N 7260 [8086:4062]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5287] (rev 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: rtsx_pci
03:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)
Subsystem: CLEVO/KAPOK Computer Device [1558:5455]
Kernel driver in use: r8169
Kernel modules: r8169
ls -la /mnt/memory/copy2ram
mem image
Code: Select all
total 0
drwxr-xr-x 4 root 38 Mar 9 10:08 000-kernel.xzm
drwxr-xr-x 19 root 280 Mar 9 12:58 001-core.xzm
drwxr-xr-x 9 root 141 Mar 9 13:03 002-xorg.xzm
drwxr-xr-x 6 root 72 Sep 24 2024 002-xtra.xzm
drwxr-xr-x 9 root 106 Dec 29 2023 003-xfce.xzm
porteus
Code: Select all
001-core.xzm:20260309
002-xorg.xzm:20260309
002-xtra.xzm:20240924
003-xfce.xzm:20231229
initrd.xz:20260309
dmesg
Code: Select all
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000965] Warning: only 4GB will be used. Support for CONFIG_HIGHMEM64G was removed!
[ 0.006941] found SMP MP-table at [mem 0x000fd790-0x000fd79f]
[ 0.019904] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[ 0.031723] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.031726] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.155983] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.166511] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.167364] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.172024] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.664539] libata version 3.00 loaded.
[ 0.667110] vgaarb: loaded
[ 0.905664] pnp: PnP ACPI: found 7 devices
[ 0.950336] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.986097] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.987556] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.987850] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.988132] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.988384] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.000725] loop: module loaded
[ 1.004815] ehci-pci 0000:00:1a.0: debug port 2
[ 1.014023] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 1.014434] hub 1-0:1.0: USB hub found
[ 1.016379] ehci-pci 0000:00:1d.0: debug port 2
[ 1.016615] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 1.017252] hub 2-0:1.0: USB hub found
[ 1.022330] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 1.024343] hub 4-0:1.0: USB hub found
[ 1.026072] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 1.026117] usbcore: registered new interface driver ums-onetouch
[ 1.026734] hub 3-0:1.0: USB hub found
[ 1.046964] IPI shorthand broadcast: enabled
[ 1.058848] Loaded X.509 cert 'Build time autogenerated kernel key: 7714bc64a553506f56615738f0f4cc66f513aa1a'
[ 1.061809] Btrfs loaded, zoned=no, fsverity=no
[ 1.062937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.378731] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 1.379651] hub 1-1:1.0: USB hub found
[ 1.386431] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 1.386592] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 1.387405] hub 3-1:1.0: USB hub found
[ 1.984233] usb 2-8: New USB device found, idVendor=5986, idProduct=0400, bcdDevice= 6.10
[ 2.449174] usb 2-9: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[ 2.497953] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[ 2.589892] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 2.635419] No soundcards found.
[ 7.310415] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20250807/utaddress-204)
[ 7.310431] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20250807/utaddress-204)
[ 7.310441] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20250807/utaddress-204)
[ 7.310447] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20250807/utaddress-204)
[ 7.310456] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20250807/utaddress-204)
[ 7.310463] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20250807/utaddress-204)
[ 7.310470] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.407001] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.407873] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 7.470093] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
[ 7.470102] cfg80211: failed to load regulatory.db
[ 7.637256] iwlwifi 0000:02:00.0: Detected crf-id 0x0, cnv-id 0x0 wfpm id 0x0
[ 7.637279] iwlwifi 0000:02:00.0: PCI dev 08b1/4062, rev=0x144, rfid=0xd55555d5
[ 7.637284] iwlwifi 0000:02:00.0: Detected Intel(R) Wireless N 7260
[ 7.773239] iwlwifi 0000:02:00.0: loaded firmware version 17.bfb58538.0 7260-17.ucode op_mode iwlmvm
[ 7.989677] r8169 0000:03:00.1 eth0: RTL8411b, 00:90:f5:f1:95:5b, XID 5c8, IRQ 33
[ 8.138488] snd_hda_codec_alc269 hdaudioC0D0: inputs:
[ 8.145886] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.146207] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.158110] iwlwifi 0000:02:00.0: base HW address: 0c:8b:fd:dc:d2:41, OTP minor version: 0x0
[ 8.372082] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 8.605024] i915 0000:00:02.0: [drm] Found haswell (device ID 0416) integrated display version 7.00 stepping N/A
[ 8.629647] intel_rapl_common: Found RAPL domain package
[ 8.629654] intel_rapl_common: Found RAPL domain core
[ 8.629656] intel_rapl_common: Found RAPL domain uncore
[ 8.629658] intel_rapl_common: Found RAPL domain dram
[ 8.706228] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 9.135745] uvcvideo 2-8:1.0: Found UVC 1.00 device BisonCam, NB Pro (5986:0400)
[ 9.855364] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input16
[ 9.855475] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input17
[ 9.855573] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input18
[ 9.914464] iwlwifi 0000:02:00.0 wlan125: renamed from wlan0
[ 9.914643] iwlwifi 0000:02:00.0 wlan1: renamed from wlan125
[ 11.053924] Generic FE-GE Realtek PHY r8169-0-301:00: attached PHY driver (mii_bus:phy_addr=r8169-0-301:00, irq=MAC)
Code: Select all
MENU LABEL Copy To RAM 5.01 32
KERNEL /boot/syslinux/vmlinuz32
INITRD /boot/syslinux/initrd50132.xz
APPEND nimportequoi copy2ram from=/porteus50132/ ramsize=20% zram=20% noauto
find porteus in sdx3 and copy to ram
Code: Select all
MENU LABEL Copy To RAM 5.01 32
KERNEL /boot/syslinux/vmlinuz32
INITRD /boot/syslinux/initrd50132.xz
APPEND from=/porteus50132/ ramsize=20% zram=20% noauto
don't find data after 6 seconds searsh
uname
Code: Select all
Linux porteus 6.18.16-porteus #1 SMP PREEMPT_DYNAMIC Mon Mar 9 10:04:39 Local time zone must i686 GNU/Linux
cmdline
Code: Select all
from=/porteus50132/ ramsize=20% zram=20% noauto initrd=/boot/syslinux/initrd50132.xz BOOT_IMAGE=/boot/syslinux/vmlinuz32
no live memory. ls mnt:
Mount:
Code: Select all
tmpfs on / type tmpfs (rw,relatime,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
none on /dev type devtmpfs (rw,relatime,size=1735548k,nr_inodes=196832,mode=755)
/dev/sda1 on /mnt/sda1 type fuseblk (rw,noatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
/dev/sda2 on /mnt/sda2 type vfat (rw,noatime,nodiratime,uid=1000,fmask=0000,dmask=0000,allow_utime=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,check=s,utf8,errors=remount-ro)
/dev/sda3 on /mnt/sda3 type ext4 (rw,noatime,nodiratime)
lspci -knn
Code: Select all
00:1c.3 Class 0604: 8086:8c16 pcieport
00:1f.3 Class 0c05: 8086:8c22
00:00.0 Class 0600: 8086:0c04
03:00.1 Class 0200: 10ec:8168
00:03.0 Class 0403: 8086:0c0c
00:1a.0 Class 0c03: 8086:8c2d ehci-pci
00:1d.0 Class 0c03: 8086:8c26 ehci-pci
00:02.0 Class 0300: 8086:0416
00:14.0 Class 0c03: 8086:8c31 xhci_hcd
00:1c.2 Class 0604: 8086:8c14 pcieport
00:1f.2 Class 0106: 8086:8c03 ahci
03:00.0 Class ff00: 10ec:5287 rtsx_pci
00:1c.0 Class 0604: 8086:8c10 pcieport
00:1f.0 Class 0601: 8086:8c49
02:00.0 Class 0280: 8086:08b1
00:16.0 Class 0780: 8086:8c3a
00:1b.0 Class 0403: 8086:8c20
ls -la porteus
dmesg
Code: Select all
BIOS-provided physical RAM map:
Warning: only 4GB will be used. Support for CONFIG_HIGHMEM64G was removed!
found SMP MP-table at [mem 0x000fd790-0x000fd79f]
[Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
libata version 3.00 loaded.
vgaarb: loaded
pnp: PnP ACPI: found 7 devices
SGI XFS with ACLs, security attributes, realtime, no debug enabled
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
loop: module loaded
ehci-pci 0000:00:1d.0: debug port 2
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
hub 1-0:1.0: USB hub found
ehci-pci 0000:00:1a.0: debug port 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
hub 2-0:1.0: USB hub found
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
hub 4-0:1.0: USB hub found
usbcore: registered new interface driver ums-onetouch
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
hub 3-0:1.0: USB hub found
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
IPI shorthand broadcast: enabled
Loaded X.509 cert 'Build time autogenerated kernel key: 7714bc64a553506f56615738f0f4cc66f513aa1a'
Btrfs loaded, zoned=no, fsverity=no
usb 2-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
usb 3-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
hub 3-1:1.0: USB hub found
usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
hub 1-1:1.0: USB hub found
usb 2-8: New USB device found, idVendor=5986, idProduct=0400, bcdDevice= 6.10
usb 2-9: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
No soundcards found.
I have no problem with grub and internal disk with 5.01 64 bit in ext4 and windows 10 in ntfs.
if I switch another drive with only porteus 5.01 32 bit same vmlinuz same initrd sha256 and do tabulation, plug the usb key witch doesnt work and write
Code: Select all
MENU LABEL Copy To RAM 5.01 32
KERNEL /boot/syslinux/vmlinuz
INITRD /boot/syslinux/initrd.xz
APPEND copy2ram from=/porteus50132/ ramsize=20% zram=20% noauto
it found from the usb key witch doesnt works's third partition porteus in porteus50132 and copy2ram
I have no problem with porteus 5.1 alfa in the same usb partition storage
Code: Select all
LABEL 51a3copy2ram
MENU LABEL porteus 5.1 alfa3 Copy To RAM
KERNEL /boot/syslinux/vmlinuz51a3
INITRD /boot/syslinux/initrd51a3.xz
APPEND copy2ram from=/porteus51a3/ load=999;777 noauto zram=20%
TEXT HELP
Run Porteus the same as above,
but first copy all data to RAM
to get a huge speed increase
(needs >768MB)
ENDTEXT
cheers
